How To Reset Subaru Touchscreen? All You Need To Know

Here is all information you need about How To Reset Subaru Touchscreen? Subarus are well-liked automobiles and with good reason. They have amazing dependability and extraordinary longevity, frequently lasting fifteen years or more.

The touchscreen in more recent Subaru models, for example, makes connecting to your smartphone and using the navigation system much simpler than before. But what happens if the touchscreen in your Subaru stops working? Being suddenly without the convenience of a touchscreen at your fingers while driving can be frustrating.

Table of Contents

How To Reset Subaru Touchscreen?

According to some manuals, being close to TV towers, power plants, gas stations, broadcast stations, big displays, airports, or any other site where loud noises or strong radio waves are emitted may affect how well the touchscreen functions. They also advise that carrying or charging a radio or other portable wireless communication equipment in the automobile may cause problems.

Reset Subaru Touchscreen

The touchscreens on more recent Subaru cars from 2016 have similar problems. In 2020, a class action complaint was brought against Subaru, alleging that the touchscreens’ Starlink infotainment system, created by Harman International, had issues.

These touchscreens have reportedly become unresponsive for drivers, or the backup camera has frozen. The central head unit might occasionally stop operating and need to be replaced.

Does The Touchscreen Problem Affect All Subaru Models?

Your Subaru Crosstrek’s unresponsive touchscreen can be reset by simultaneously pressing and holding the power, tune, and CD ejector buttons for at least 10 seconds. Both the touchscreen and the head unit system will be reset and restarted by doing this.

Does The Touchscreen Problem Affect All Subaru Models

Subaru Forester

Your Forester touchscreen can be reset by pushing the power/volume, tune/scroll, and CD ejector buttons, much like on a Subaru Crosstrek. The volume and tune buttons are just below the screen, while the CD ejector is positioned above the tune/scroll button. Press the buttons repeatedly until the screen shuts off and the computer restarts.

Subaru Outback

On the left volume knob of the touchscreen display of the Subaru Outback, you’ll find the reset button. Hold this button until the question “Would you like to turn the display off?” appears on the screen. Just keep pushing the reset button up until the display goes dark. Then the system will restart and reset.

Why Is Subaru Touch Screen Not Working? (Solution)

The following section of this tutorial will focus on the various causes of touchscreen malfunctions in Subaru Outback vehicles. Use this list to identify your problem so you can solve it by applying the right troubleshooting technique.

Bug

Another frequent reason for Subaru touchscreen problems is bugs and malfunctions. These kinds of failures are frequently brought on by internal run-time problems that the software has experienced. Every software program occasionally has a fault or a malfunction that prevents it from functioning properly.

When you have errors and malfunctions, they frequently go away independently. The randomness and ambiguity of the sources of these errors can make it difficult to pinpoint the actual cause of your issues.

The troubleshooting techniques outlined below can be used to address difficulties that continue despite being attributed to faults or glitches. All of the techniques on this list effectively resolve touchscreen problems brought on by bugs or glitches.

Solution

The best approach to fix touchscreen software on a Subaru Outback with display problems is with a cycle key. You must first completely switch off your car before you can proceed. The engine and accessory mode are included in this.

If your car doesn’t shut off until you get out, you should replicate this by opening and closing the door. Before starting the car again, you should wait at least two minutes after ensuring the entire car has shut down, including the touchscreen and radio.

You will have successfully key-cycled your Subaru vehicle once you have completed this. The ideal strategy to promote the resolution of display issues brought on by bugs and glitches is to do this.

Fix Two: Perform A Soft Reset

Another option to urge the touchscreen software in your Subaru Outback to fix any internal problems that might be the source of your black screen troubles is to do a soft reset.

You must first press and hold the Volume button for at least 30 seconds before you can do a soft reset on your car. Hold these buttons down until the screen turns completely black. Typically, this takes thirty seconds.

Holding the volume button will initiate a soft reset if the screen is already black due to black screen problems. Your display difficulties should be fixed once the soft reset procedure is finished. After you’ve finished the soft reset procedure, your user settings will still be in place.

Fix Three: Perform Master Reset

You might think about doing a master reset of the touchscreen software on your Subaru Outback if you are dealing with frequent issues. This can be done in a very easy way. By choosing the factory reset option in the settings menu, you can completely reset the touchscreen software system on your Subaru Outback.

The system reset message will appear on your touchscreen console once you have decided to factory reset your Subaru Outback. To complete the Master Reset procedure, adhere to the on-screen instructions.

Doing this will completely reformat and update all of the files related to your Subaru Outback software. You can fix most problems with your Subaru Outback by doing this. Your Subaru Outback touchscreen system can only be reset to factory settings when your car is still.

This security measure helps prevent users from changing Bluetooth settings while operating a vehicle. You should attempt a soft reset of your vehicle first if you cannot use your touch screen because it is unresponsive or there is no display. This method of starting the master reset will need some touchscreen use.

Fix Four: Wait For A Few Days

You could try to wait for your problem out. Glitches and bugs typically disappear independently, requiring no additional human input. Your problem may go away on its own if you only wait a few days.

Although it may not be the best option, this can save you time and headaches when attempting to fix touchscreen problems with your Subaru Outback. Your best course of action for resolving errors and glitches may be to wait for them to go away on their own.

Fix Five: Contact The Dealership Or Subaru

After software updates and resets, if your Subaru Outback’s touchscreen software still gives you trouble, you should consider contacting Subaru to seek more help. Subaru or your authorized Subaru dealer may suggest additional ways of troubleshooting and remedies for your problem.

Subaru can be reached over the phone or online. You can also bring your car to the Subaru dealer to have them examine the touchscreen in your Subaru. You must thoroughly describe your problem if you want to contact Subaru over the phone or online.

Your case will be allocated to a Subaru technician who will assist you in going over any potential troubleshooting steps you might have missed. When you experience problems with the touchscreen software on a Subaru Outback, this is frequently the best line of action.

It can be unpleasant to deal with customer assistance remotely or bring your car in for maintenance. Subaru is, without a doubt, the leading authority on your car and the software that runs the touchscreen. They can provide you with the greatest guidance for handling your specific problem.

Short Circuit In The System

You can experience problems with your car’s touchscreen if the electrical system has a short circuit. Wiring issues are typically the source of a short circuit. To resolve this problem, utilize the troubleshooting technique listed below.

Fix: Examine The Connectors And Enlist A Car Electrician’s Assistance

If you discover a problem, check the touchscreen connectors on your Subaru Outback and take the vehicle to an electrician for evaluation. Unless you have substantial experience working with wiring and electrical components, you should try to avoid trying to handle connector issues yourself.

Bad Cables

Your problems could be brought on by the touchscreen cables in your Subaru car. Cable problems could prevent your touchscreen from obtaining enough electricity to function properly. Your car’s cables are crucial components, so it’s necessary to maintain and examine them frequently to ensure they’re working properly.

Solution: Disconnect, Then Reconnect Cables

Consider unplugging and replugging each cable connected to your car’s touchscreen. This will aid in repairing any connections that your touchscreen wiring may have made improperly.

Be careful when removing and reinstalling these wires; only do it after completely turning off the engine. Additionally, it would help if you didn’t try to fix the cord for your touchscreen unless you have some prior electrical and mechanical understanding.

Before attempting to fix the problem yourself, you should take your automobile to a qualified technician if you experience connectivity problems with your touchscreen. A Subaru specialist will resolve your problem.

Display Is Faulty

Black screen problems may be brought on by malfunctioning touchscreen console displays or problematic cable connections. Although uncommon, display problems could be brought on by aging, abuse, or damage from a collision or liquid exposure.

If you frequently have black screen problems, your display is probably damaged, and you won’t be able to use it effectively until the problem is fixed. Before thinking about replacement or repair, it’s crucial to rule out all other potential causes of your black screen problem because a display may be expensive.

Solution: Recover Or Replace

Consider having your car serviced or replaced at the Subaru dealership. Only a trained Subaru technician should attempt to fix your touchscreen display because it cannot be done simply at home.

Your display can be examined by a Subaru mechanic, who can decide whether a repair or replacement is necessary. If you’re lucky, they’ll find that your issue results from software problems, which will help you avoid paying a lot of money to repair your display.

There’s No Power Going to It

Your touchscreen display might not function properly if your battery is depleted or if there is a power transfer problem. You will have black screen problems if your touchscreen is not getting enough power.

Additionally, the fuses connected to your touchscreen console may have blown and require replacement. Power problems could bring on your black screen problems. One of the primary causes of touchscreen problems is power problems. The touchscreen in your Subaru Outback requires a lot of power to operate, so it will only work properly if it gets enough power.

Solution: Check Fuse Box

Inspecting the fuse box ensures that any blown fuses are located and replaced. By doing this, you can be sure that your center console display has enough electricity to operate. Depending on the type of Subaru Outback you own, different locations will house the fuse box for your infotainment console.

To find the precise position of the fuse box in your car, check the owner’s manual, or take it to a repair and have them look it over. Because there are electrical parts involved, it’s crucial that you carefully open the fuse box only after the car has been completely turned off.

Out-of-date software is the most frequent cause of touchscreen problems in the Subaru Outback. Like any software-based program, your Subaru relies on regularly scheduled upgrades to maintain maximum performance. Without these upgrades, your touchscreen’s Starlink software will likely have more frequent issues, such as the screen going black and becoming unresponsive.

Most bug fixes and patches published for your Subaru Outback will work to eliminate these issues. As a result, it’s critical that you consistently keep your software updated. Any available updates for your car must be manually downloaded and installed. The recommended troubleshooting approach will describe how to accomplish this appropriately below.

You must first start your car’s engine to initiate the Subaru Starlink software upgrade process. When asked, click the I Agree button. Enter the Settings menu on your vehicle’s touchscreen once the audio device and your car have fully started up.

Select the General tab once you’re in your car’s settings menu. The System Information tab is included in the General tab. You can check to see if your current software version corresponds to the most recent Subaru release by going to the System Information tab.

You must use Wi-Fi to connect your Subaru Outback to the internet if it does not match your vehicle’s most recent update of the software. Use the touchscreen to navigate back to the Settings menu in your car to accomplish this. There is a General tab that you can access to access the Wi-Fi menu.

Subaru Radio touch screen freeze problem

Conclusion

As a result of this article, do you know How To Reset Subaru Touchscreen? This problem makes the infotainment console’s display improper and annoying.

This guide’s information can correctly pinpoint and fix any problems that might be causing problems with your touchscreen. It would help if you took care of any touchscreen-related issues as soon as they arise. Driving while this part of your car isn’t working properly can be risky.

Bugs and glitches, outdated software, defective connectors and components, or outdated firmware are common causes of touchscreen problems. In this book, each of these problems has been thoroughly covered, along with comprehensive troubleshooting techniques that you can use to address them.

Frequently Asked Questions

How do you reboot the screen on a Subaru?

Push and hold the home button in the service menu, then push the volume button twice. The screen display will briefly go dark before coming back.

How do I reset my Subaru infotainment system?

For at least 10 seconds, press and hold the home and fast-forward buttons. After pressing the Onstar call button, disconnect. Restart the automobile after turning it off. Hold the phone hangup button on the steering wheel while in park for ten seconds.

What is the problem with the touch screen on Subaru Outback?

Any purchaser or lessee of a 2020–2022 Subaru vehicle who has issues with the touchscreen infotainment system. What is happening? Attorneys are investigating if a fault is to blame for drivers’ complaints that the infotainment system freezes, goes dark, stops responding, or displays dead pixels.

How do I reset my car touch screen?

First, give the power button a few seconds of long pressing. Open the menu tab next. Go here and choose Factory Reset. When the factory reset is finished, wait until the car stereo turns on again.

Was this article helpful?
YesNo

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *