Can You Turn Off The Auto Subaru Auto Start-Stop? Answered

We have everything you require to know Can You Turn Off The Auto Subaru Auto Start-Stop? Subaru is yet another car company to include the annoying auto-stop/start function! The auto industry uses auto-stop-start to be more “fuel efficient,” but let’s be honest.

Instead of saving petrol, it only creates issues. The auto-stop feature will shut off your engine whenever you come to a halt, whether at a stop sign, red light, or in stopped traffic.

Yes, I did say to STOP your engine in traffic. Suppose you want to purchase a dependable Subaru that will retain its quality for a long time but are now apprehensive due to this irritating aspect.

Can You Turn Off The Auto Subaru Auto Start-Stop?

Why should every time you start your car, you or anyone else must remember to switch off something? That shouldn’t be necessary! Therefore, we developed a method to eliminate this annoying feature. All you need to do to get started using the Subaru Autostop Eliminator is plug it in. With this gadget, your Subaru’s auto-start-stop feature will be permanently disabled.

Can I Disable Subaru Auto Start Stop?

Subaru implemented this technology in its new cars to save drivers gasoline and become more environmentally friendly. However, little did they know that the auto-stop feature would only enrage their devoted consumers.

We would rather chance to ruin the engine due to the wear and tear that auto-stop-start can cause than risk being rear-ended and suffering thousands of dollars’ worth of damage while waiting at a red light.

So, everyone’s main concern is, “Is there a way I can disable auto-start-stop?” The answer is yes. On an Outback and a Legacy, you can temporarily turn off this feature using the 11.6-inch touchscreen menu.

Pushing the automobile icon button on the home screen will modify the settings, and when you pick “Others,” the Auto Stop-Start function will be disabled. This is a quick treatment, but it is not a long-term answer.

The system will constantly restart this feature whenever you turn off the engine. As a result, you will need to manually re-enable the system each time you get into your car.

How To Use Subaru Auto Start Stop & Auto Vehicle Hold Features?

The Auto Start Stop and Auto Vehicle Hold technologies included in the 2020–2021 Outback and Legacy models are explained in this video.  You will be shown how to activate or deactivate these features and what to anticipate from them.

Auto Vehicle Hold is intended to maintain your car’s stop even after you let off on the brakes.  It’s a fantastic safety feature that can keep you at a stop in mountainous terrain or stop you from moving forward if you’re preoccupied with a light or stop sign.

Why Does Auto Start-Stop Not Working?

Most current automobiles now include start-stop technology, previously only seen in hybrid cars. The system has a lot of wonderful benefits, such as lowering pollution from gasoline-powered automobiles.

Start-stop technology was included in automobiles by automakers for this and another reason: it improves fuel efficiency. So if your car has a start-stop mechanism, you should have more cash!

Gas stations are never necessary for hybrid car owners! You may now buy new underwear with the money you save from your start-stop system! Your wife informed me, and I am disappointed with you.

But you will occasionally encounter problems with any system, especially in your car. So allow me to explain the various causes of your car’s auto start-stop system failing. Your car’s auto start-stop may not operate for several reasons.

The battery’s charge and health are the most frequent causes. The sophisticated Battery Management System (BMS) will turn off the start-stop feature anytime it is in use if the battery is running low.

The second most frequent problem is the excessive weather (too hot or too cold). Thirdly, a similar bypass can also be produced by engine temperature. A malfunctioning engine management system is the fourth most frequent problem. Last but not least, the issue does arise with unavoidable interruptions like:

• Unbuckled seatbelts for safety
• Open the car’s doors or hood.
• Active parking helper
• The reverse gear is selected.
• The automobile’s wheel turned sharply.
• An excessively steep hill with a gradient
• Sensors (Battery or air mass) not functioning
• The low vacuum pressure braking system

Here are a few common reasons why auto start-stop malfunctions.

State Of Charge And Health Of The Car Battery

The automobile battery’s crucial job is to support the various electrical systems and ensure that the engine starts. As a result, the Battery Management System (BMS) will automatically turn off the start-stop feature when the charge is low (below 80 -75%).

Similarly, if the car’s computer notices the battery is running low, it will turn off the start-stop function rather than risk struggling to restart the vehicle. If you notice the symptoms above, bring your automobile to a reputed auto shop for a battery test.

In most cases, obtaining a new battery will revive the Auto Start-Stop feature. But first, make sure your battery is fully charged and has the power to operate the feature in contemporary hybrid vehicles.

Wrong Car Battery

A similar safety mechanism may occur when you install the incorrect battery technology. The auto Start-Stop function will continue to be disabled since the incorrect battery results in limited charging cycles.

Auto start-stop technology uses a specific battery (deep cycle) type that can endure the frequent stopping and starting of the engine. The BMS must accurately register for the new battery to perform to its maximum capacity.

The BMS should recognize the new start-stop battery. In this situation, you’ll need to bring your car to an auto shop to reset the battery data, and the system will be reprogrammed. This time, you’ll need to purchase the proper size and technology needed to support the function and power of the electrical components in your car.

Extreme Outside Temperature

The battery operates outside of its typical range in extremely cold weather. More power may be needed to run the air conditioning system to cool the cabin as the outside temperature gets excessively hot or cold.

The BMS will turn off the auto start-stop function until it registers a reasonable interior temperature (40 to 85F). When the manufacturer’s comfort settings consume significant battery power, the Battery Management System (BMS) may fail to trigger the auto Start-Stop function.

To find out if the start-stop feature may be supported concurrently, you must first examine the comfort settings for extreme weather conditions provided by the automobile manufacturer. After that, let your automobile have enough time to warm up in cold weather and cool off in hot weather.

Extreme Engine Coolant Temperature

The engine may become too hot or cold in the summer or winter, and more current will be needed to keep it operating within its typical temperature range. The engine uses the batteries or consumers when it gets chilly to maintain heat.

A larger starting current is needed for the engine to produce its heat through combustion. When the airstream is insufficient at traffic lights, a hot engine drains the energy from the automobile battery to keep the radiator fan operating.

The BMS might activate the stop-start feature once the engine reaches the ideal operating temperature. As a safety measure, it turns off as a result. If the start-stop function is optional when the engine gets too hot or cold, you must inspect your car’s cooling system. Wait for the dashboard to indicate the start-stop system is ready, then let the engine cool down.

Faulty Engine Management System

If the car’s computer notices any issues with the engine management system, it will turn off stop-start. Therefore, there are many chances that the auto start-stop not working notice will show up when the engine malfunctions.

System Interruptions

Besides the battery and temperature change, other variables could also be blamed for the auto-start not working. For instance, failing to buckle your seat belt or lock the car doors can prevent this feature from working.

Additionally, when the wheels are moved at a sharply acute angle while the car is stationary, the BMS will override the auto start-stop feature. On the dashboard, an “Auto-stop unavailable” light will come on. As a safety measure, it turns off, especially when the battery is under load.

To prevent these disruptions, ensure that all elements that interact with the BMS are in the right position or functioning properly. For instance, always ensure your car’s sensors are clear and functional before taking it to the garage.

Conclusion

Here we sum up all related to Can You Turn Off The Auto Subaru Auto Start-Stop? It is essential to see an auto shop immediately if the auto start-stop is still blinking after trying all the remedies offered.

Most likely, your car requires a new battery. Maintaining fuel efficiency and reducing harmful emissions from gas-powered vehicles is essential. Your car will easily function with the auto start-stop feature if it complies with the requirements.

Frequently Asked Questions